-Remove AbsoluteClipRects. It's never used.
-Inline some static functions. In the process,
noticed that the clip rects for CSS clip are broken.
In theory, this patch fixes that, but I didn't test it
since we probably want to just remove the feature anyways.
R=abarth@chromium.org
Review URL: https://codereview.chromium.org/964723004
It doesn't do anything RenderLayer specific anymore. This
does mean adding another pointer to RenderBox. We might want
to do something about that eventually, but for now it seems fine
to make forward progress in terms of getting rid of the RenderLayer
tree.
R=eseidel@chromium.org
Review URL: https://codereview.chromium.org/963253002
-Remove RenderLayerFilterInfo. It was just a static map for
FilterEffectRenderers. Instead, put the FilterEffectRenderer
directly on RenderLayer.
-Make FilterEffectRenderer not be RefCounted. This involved
deleting a ton of dead code around ReferenceFilters since they
were the other subclass of Filter. As best I can tell,
reference filters are already don't parse in Sky, so this should
just be removing dead code.
R=abarth@chromium.org
Review URL: https://codereview.chromium.org/962543003
-Move perspectiveOrigin to RenderBox. It's only used in
one place and called on a RenderBox.
-Inline some methods that were just calling out to the renderer.
-Inline updateStackingNode() into the constructor and remove
the branch since requiresStackingNode is always true.
-Delete a bunch of dead code.
R=abarth@chromium.org
Review URL: https://codereview.chromium.org/961053002
However WebView::close() no longer crashes. close() is never called
in MojoShell since mojo can't shutdown yet.
I tried closing the existing WebView and replacing it
but somehow that caused it to only draw red. After a while
of looking at this with abarth we decided to just load into
the same WebView for now.
Eventually we should do something smarter where we start the
provisional load and only replace the webview once the new one is
ready, but that's a later CL.
R=abarth@chromium.org
BUG=
Review URL: https://codereview.chromium.org/952273003
-Consolidate the beginTransparencyLayers calls. The call
on layer()->parent() was just not needed as best I can tell
and the filter one could just be shared with the non-filter
codepath. FWIW, blink has already made a similar set of changes.
-Don't walk up the tree calling beginTransparencyLayer.
We're doing this in a recursive call down, so we've already
created the transparency layer for any transparent ancestors.
-Remove unused TransparencyClipBoxMode argument.
-Inline the paintingExtent method.
-Removed unused REVEAL_TRANSPARENCY_LAYERS #define.
R=abarth@chromium.org
Review URL: https://codereview.chromium.org/959543002
I also fixed the transform hack in material-element to clean
up after itself.
I also discovered that our namedSetter implementation did not
handle null (it crashed) while doing this. I fixed that
and tested my fix.
This runs great on a Nexus 5, but poorly on an Nexus 10.
R=abarth@chromium.org
BUG=
Review URL: https://codereview.chromium.org/956753002
-Get rid of paintsWithTransform.
-Remove currentTransform. It was only ever called with
IncludeTransformOrigin and on non-null transforms.
-Remove renderableTransform. It was only called on
non-null transforms.
-Remove a layer()->parent() branch. The ASSERT had been
added in a previous patch, but the branch wasn't removed.
-Inline makeMatrixRenderable. It was only called in one
place.
-Add a test to make sure that transform origin is corrrectly
excluded from the transform computedStyle.
R=abarth@chromium.org
Review URL: https://codereview.chromium.org/958463002
This patch adds utility functions which provide a single choke point for calling into sky application code. For now this is only serving the purpose of having a common trace event for calls into app code.
R=abarth@chromium.org, abarth
BUG=
Review URL: https://codereview.chromium.org/941153003
Merge most of it into RenderBox. Only RenderBoxes can have
layers now. This also meant a bit of code could be cleaned up
since some virtuals (e.g. updateFromStyle) are no longer needed
since they're only called on RenderBoxes.
collectSelfPaintingLayers is the only bit that's moved into
RenderBoxModelObject instead of RenderBox. That's because we
need to be able to recurse down into RenderInlines since they
may contain RenderBoxes that have selfPaintingLayers.
R=abarth@chromium.org
Review URL: https://codereview.chromium.org/953673002
This removes support for opacity, filters and clip-path
on RenderInlines. If you want inline content that uses
these properties you need to use an inline-block. We
may want to add back support for opacity or filters
on inlines eventually, but we'd implement it differently
and right now they're getting in the way.
R=abarth@chromium.org
Review URL: https://codereview.chromium.org/950963003
This reverts commit 75d3e86468813c450c36d2320bbd7a8b2e2ba9c4.
Android mojo_shell fails to run. It can'd find the
AndroidHandler class. Unclear what part of this change is causing
this. jamesr and I spent a while trying to figure out, but we're
reverting this for now to unblock the rest of the team working
on android development.
Hopefully the paris team will be able to bail us out here when
they wake. :)
R=jamesr@chromium.org,qsr@chromium.org,davemoore@chromium.org
Review URL: https://codereview.chromium.org/951673002
This CL updates sky-box, sky-button, sky-checkbox, sky-input, and sky-radio to
work in Dart. We don't have a data binding system yet, so there's a bit more
plumbing in the code.
This CL adds support for sky-element@attributes, which lets you specify which
attributes your element supports. We use this information to synthesize getters
and setters for those attributes and to dispatch to mumbleChanged methods when
the attributes change.
I've also wrapped the widgets demo itself in a sky-scrollable so the whole
thing scrolls.
R=eseidel@chromium.org
Review URL: https://codereview.chromium.org/946813005
After this CL, you can use <sky-element> to describe custom elements. The
current iteration is very basic and is hardcoded to "example", but its a start.
This CL renames the |init| function to |_init| to prevent importers from
calling it directly. Also, we now pass the <script> element to |_init| to give
some context.
R=ojan@chromium.org, eseidel@chromium.org
Review URL: https://codereview.chromium.org/950493003
On the web, if you set position:absolute, but not
top/right/bottom/left, then the absolute goes where it
would have gone if it wasn't positioned. The use-cases for
this are slim and it introduces a lot of complexity to the
engine.
Also changes behavior in the presence of direction:rtl.
On the web, direction:rtl and top/left:auto would
sometimes set right:0. Instead we always position at
0,0 if the opposing values are auto.
This removes the code for this positioning and allows
simplifying a bunch of dirty bit handling code since
we don't need to setNeedsLayout if lines move around
or wrap differently.
The test cases did change their output, but the new
positioning all looks correct to me.
Review URL: https://codereview.chromium.org/944073006
We only need to walk the immediate children of the paragraph.
The other inline children of the paragraph will get paint called
on them and they will then appropriately add the self painting
layers to the array inside their paint calls.
R=abarth@chromium.org
Review URL: https://codereview.chromium.org/945223002
-ASSERT(layer()->parent()) in all the transform codepaths since
the RenderView cannot have a transform.
-Early return if the content rect does not intersect the
damage rect in the painting code. We don't need to do
any of the filter and/or transparency dance if we're
not going to paint anything. This also allowed for
removing the shouldPaintContent bool.
-Remove a random style() null check that can't be hit.
R=abarth@chromium.org
Review URL: https://codereview.chromium.org/950553002
This CL implements custom elements. The design is as follows:
1) Authors subclass Element and call registerElement.
2) When we create C++ elements for custom elements, we call the author's
constructor synchronously.
3) The attach/detach/attributeChanged callbacks are called either:
a) when exiting the current custom element callback scoped (e.g., before
returning from appendChild), or
b) when draining the microtask queue.
The implementation in this CL is a bit fragile because we don't detect name
registration conflicts and we let you create custom elements with the same name
as built-in elements. Also, not every part of the engine is prepared to execute
script synchronously below createElement. We'll need to iron out these issues
over time, but this CL is a start.
R=ojan@chromium.org
Review URL: https://codereview.chromium.org/943013002
The only bit that was still used was the
containingBlockLogicalWidthChanged check in
RenderBlock::widthAvailableToChildrenHasChanged.
a4f1e657ff
is the patch that added that code. I added a
test to confirm we still pass the test case
that code was added for.
R=eseidel@chromium.org
Review URL: https://codereview.chromium.org/945003002
This CL is progress towards deleting the concept of an HTMLElement entirely. We
won't actually get all the way there in this CL series, but we're getting
closer. This CL also will let us make custom elements just be Elements instead
of HTMLElements.
R=eseidel@chromium.org
Review URL: https://codereview.chromium.org/942933003
There are some cases in this patch where it's not
obvious that the code only applies to position:relative,
but the code asserts that it does. In those cases,
I trusted the asserts and deleted the code.
R=esprehn@chromium.org
Review URL: https://codereview.chromium.org/938193004
This does several things:
1. Teaches sky about asynchronous script execution. Previously once all imports
were loaded and the script text was available, we executed a script and assumed
it completed synchronously. We left the parser loop to do so, but that was fine
as the next chunk from the background thread would resume the parser. In this
change scripts now load and execute separately. The "load" step may trigger
further dart import loads which may cause the execution to happen asynchronously
which required teaching both the DartController and the HTMLScriptRunner to
take callbacks to allow HTMLDocumentParser to know to continue parsing after
the Dart script has resolved its imports and executed.
This required re-working some of how the parser executes scripts and I
re-purposed isWaitingForScripts to include "is the parser blocked" where
as before it was limited only to "does the treebuilder have a script", even
though the imports system may have had pending scripts as well.
I made HTMLScriptRunner live only as long as the script it was executing
since it only contained per-script state at this point.
2. Fixed an error reporting bug whereby we would not show errors when "init"
failed to execute, only "main". This required using the dart_mirrors_api.h
which required adding an include path to the core build. :(
3. Made it possible for a single sky file to contain multiple dart <script>
tags. Each <script> is a separate library and executes as
soon as </script> is seen. main or init is called for each. This required
mangling "urls" for these script blocks since Dart unique's libraries by urls.
Before this change it may have been possible to do <import 'foo.sky'> and then
<script>import 'foo.sky'</script> and have it work!?
R=abarth@chromium.org
BUG=
Review URL: https://codereview.chromium.org/938623005
Change hit testing to walk over the render tree instead of
the RenderLayer tree. This is a step in the direction of
removing the RenderLayer tree entirely.
For now, there's a few calls back into RenderLayer that
will be removed in a followup patch. This patch also
breaks hit testing on transformed inlines. I'll be
removing the ability to transform inlines in a
followup patch anyways, so it's ok for hit testing
to give the wrong result temporarily here.
Almost all of this patch is just moving code from
RenderLayer to RenderBox. The primary substantive change
is in RenderBox::hitTestLayer. Instead of having
hitTestChildren calls, we call collectSelfPaintingLayers,
reverse sort by z-index (so we start at the top),
and then iterate over the result.
The test-case also exposes that we don't correctly hit
transformed elements inside inline-blocks. I went back as
far as 4153b8a515d54275934d4244aaf2d5a7a8fe3333 and the
bug still happened.
R=abarth@chromium.org
Review URL: https://codereview.chromium.org/945693002
