I have attempted to cherry pick some useful information from eglinfo
which is often requested when resolving issues with rendering.
This information is not required to compile an Flutter application, so
it is a little different to the other displayed information.
- Adds better instructions for hot reload (if using the right flags),
hot restart, quitting, clearing, and more. These were already being
printed when using the VM, so this aligns with that.
- Adds an extra parameter for `CommandHelp` to `ResidentRunner` so
`ResidentWebRunner` can pass a version of it that uses its separate
logger and not `globals`. In order to support this, classes up the stack
also provide a `Terminal`, `Platform`, and `OutputPreferences`.
- Fixes up use of `globals` from an earlier change to implement hot
reload to use the logger instead. Same with `globals.platform`.
- Adds tests to check that only hot restart is printed when not using
the extra front-end flags, and both hot restart and hot reload is
printed when you are.
## Pre-launch Checklist
- [x] I read the [Contributor Guide] and followed the process outlined
there for submitting PRs.
- [x] I read the [Tree Hygiene] wiki page, which explains my
responsibilities.
- [x] I read and followed the [Flutter Style Guide], including [Features
we expect every widget to implement].
- [x] I signed the [CLA].
- [x] I listed at least one issue that this PR fixes in the description
above.
- [x] I updated/added relevant documentation (doc comments with `///`).
- [x] I added new tests to check the change I am making, or this PR is
[test-exempt].
- [x] I followed the [breaking change policy] and added [Data Driven
Fixes] where supported.
- [x] All existing and new tests are passing.
With this change, `flutter widget-preview start` will launch a working
widget preview environment that can render previews from a target
project.
Also fixes an issue where `--offline` wasn't being respected by some pub
operations.
SkSL precompilation was only ever beneficial for iOS. For other
platforms, we recommended against it as Skia generated shaders per
target architecture which could be invalid on other devices. It is no
longer possible to use Skia on iOS.
Delete all Skia shader bundling logic.
Fixes https://github.com/flutter/flutter/issues/80091
Powered by the new and amazing `unnecessary_ignore` lint.
We're not enabling this lint by default because being able to
temporarily use ignores that don't ignore anything is a powerful tool to
enable migrations. We should turn this lint on locally periodically,
though, and clean up all outdated ignores.
This auto-formats all *.dart files in the repository outside of the
`engine` subdirectory and enforces that these files stay formatted with
a presubmit check.
**Reviewers:** Please carefully review all the commits except for the
one titled "formatted". The "formatted" commit was auto-generated by
running `dev/tools/format.sh -a -f`. The other commits were hand-crafted
to prepare the repo for the formatting change. I recommend reviewing the
commits one-by-one via the "Commits" tab and avoiding Github's "Files
changed" tab as it will likely slow down your browser because of the
size of this PR.
---------
Co-authored-by: Kate Lovett <katelovett@google.com>
Co-authored-by: LongCatIsLooong <31859944+LongCatIsLooong@users.noreply.github.com>
When running `dart format` over these lines the `// ignore` ended up on
a line where it wasn't properly ignoring the lint. This adjusts the
placement of `// ignore`s so they will continue to ignore the right
thing even after the code is auto formatted.
I am hoping that if we do this now the large PR that formats the entire
repo will go in smoother without manual intervention.
The previous attempt at this fix was assuming that the tool's file
system was a `LocalFileSystem`, but in reality it's a `LocalFileSystem`
wrapped in an `ErrorHandlingFileSystem`. This change takes this into
account.
Fixes https://github.com/flutter/flutter/issues/160082
Fixes https://github.com/flutter/flutter/issues/156962
---------
Co-authored-by: Andrew Kolos <andrewrkolos@gmail.com>
The generated widget_preview_scaffold project needs to explicitly
reference the assets from the parent project's pubspec.yaml. This change
updates flutter widget-preview start to read the parent project's
pubspec.yaml and add references to the assets listed to the
widget_preview_scaffold's pubspec.yaml. If generate: true is set in the
parent project, a reference to the autogenerated flutter_gen package is
manually added to the widget_preview_scaffold's package_config.json.
This PR attempts to improve clarity of androids section of `flutter
doctor -v` output by providing explicit information about which JDK is
being used and how to configure a different one if needed.
### Before
```console
• Java binary at: /Users/user/Applications/Android Studio Ladybug Feature Drop 2024.2.2 Canary 2.app/Contents/jbr/Contents/Home/bin/java
```
### After
1. When JDK is from Android Studio:
```console
• Java binary at: /Users/users/Applications/Android Studio Ladybug Feature Drop 2024.2.2 Canary 2.app/Contents/jbr/Contents/Home/bin/java
This is the JDK bundled with latest Android Studio installation
To manually set a custom JDK path, use: `flutter config --jdk-dir="path/to/jdk"`
```
2. When JDK is from JAVA_HOME env variable:
```console
• Java binary at: /Users/user/Applications/Android Studio Ladybug Feature Drop 2024.2.2 Canary 2.app/Contents/jbr/Contents/Home/bin/java
This JDK is specified by JAVA_HOME environment variable
To manually set a custom JDK path, use: `flutter config --jdk-dir="path/to/jdk"`
```
3. When path to JDK is set in flutter config:
```console
• Java binary at: /Users/user/Applications/Android Studio Ladybug Feature Drop 2024.2.2 Canary 2.app/Contents/jbr/Contents/Home/bin/java
This JDK was found in system PATH
To change current JDK, run: `flutter config --jdk-dir="path/to/jdk"`
```
4. When java binary is found in PATH (as fallback)
```console
• Java binary at: /Users/user/Applications/Android Studio Ladybug Feature Drop 2024.2.2 Canary 2.app/Contents/jbr/Contents/Home/bin/java
This JDK is specified in Flutter configuration
To manually set a custom JDK path, use: `flutter config --jdk-dir="path/to/jdk"`
```
### Motivation
I think it's described in
https://github.com/flutter/flutter/issues/153156#issuecomment-2336814991.
TLDR; many developers struggle with Java-related issues and more verbose
doctor's output will (presumably) improve DX in that part.
fixes#153156
## Pre-launch Checklist
- [x] I read the [Contributor Guide] and followed the process outlined
there for submitting PRs.
- [x] I read the [Tree Hygiene] wiki page, which explains my
responsibilities.
- [x] I read and followed the [Flutter Style Guide], including [Features
we expect every widget to implement].
- [x] I signed the [CLA].
- [x] I listed at least one issue that this PR fixes in the description
above.
- [x] I updated/added relevant documentation (doc comments with `///`).
- [x] I added new tests to check the change I am making, or this PR is
[test-exempt].
- [x] I followed the [breaking change policy] and added [Data Driven
Fixes] where supported.
- [x] All existing and new tests are passing.
If you need help, consider asking for advice on the #hackers-new channel
on [Discord].
<!-- Links -->
[Contributor Guide]:
https://github.com/flutter/flutter/blob/main/docs/contributing/Tree-hygiene.md#overview
[Tree Hygiene]:
https://github.com/flutter/flutter/blob/main/docs/contributing/Tree-hygiene.md
[test-exempt]:
https://github.com/flutter/flutter/blob/main/docs/contributing/Tree-hygiene.md#tests
[Flutter Style Guide]:
https://github.com/flutter/flutter/blob/main/docs/contributing/Style-guide-for-Flutter-repo.md
[Features we expect every widget to implement]:
https://github.com/flutter/flutter/blob/main/docs/contributing/Style-guide-for-Flutter-repo.md#features-we-expect-every-widget-to-implement
[CLA]: https://cla.developers.google.com/
[flutter/tests]: https://github.com/flutter/tests
[breaking change policy]:
https://github.com/flutter/flutter/blob/main/docs/contributing/Tree-hygiene.md#handling-breaking-changes
[Discord]:
https://github.com/flutter/flutter/blob/main/docs/contributing/Chat.md
[Data Driven Fixes]:
https://github.com/flutter/flutter/blob/main/docs/contributing/Data-driven-Fixes.md
---------
Co-authored-by: Andrew Kolos <andrewrkolos@gmail.com>
It's possible that the tool can be in the process of shutting down,
which could result in the temp directory being deleted after the
shutdown hooks run before we check if `output` exists. If this happens,
we shouldn't crash but just carry on as if no devices were found as the
tool will exit on its own.
Fixes https://github.com/flutter/flutter/issues/141892
---------
Co-authored-by: Andrew Kolos <andrewrkolos@gmail.com>
This started happening after moving DDS to launch from `dart
development-service` rather than `DartDevelopmentService` (see
33b402d24c2131dcf97e272ec3d59c0249762e7f) . This state error was
originally meant to be thrown when some string parsing failed, but is
currently wrapping the `DartDevelopmentServiceException`.
Fixes https://github.com/flutter/flutter/issues/158537
I was poking around in logger.dart when I noticed a few classes have unnecessary exposed member variables. This PR reduces visibility of these in the pursuit of making these classes slightly easier to grok.
<details>
<summary> Pre-launch checklist </summary>
</details>
Fixes https://github.com/flutter/flutter/issues/153777.
To summarize that issue, `ErrorHandlingFileSystem.systemTempDirectory` calls [`LocalFileSystem.systemTempDirectory`](45c8881eb2/packages/flutter_tools/lib/src/base/file_system.dart (L229)), which makes a `Directory.createSync` call, which can throw exceptions that _should_ be handled and result in a graceful tool exit (e.g. insufficient storage). However, we aren't catching those, hence this issue.
All we need to do is wrap that call with the `FileSystemException`-handling logic we already have in the tool. See the diff.
I don't think I'll be cherry-picking this since 1) it's not an extremely common crash and 2) users can probably pick apart the crash message and figure out that they need to clear some storage space to proceed.
<details>
<summary> Pre-launch checklist </summary>
</details>
Documents when to use `throwToolExit` and how to use it.
Replaces every invocation of `throw ToolExit` with `throwToolExit` and makes the former impossible; this is so that every user will at least (hypothetically) have the chance to read the documentation attached to `throwToolExit` (and if we change parameters in the future they will all flow through one place).
~~Fixes~~ Discovered in https://github.com/flutter/flutter/issues/153776.
To my knowledge, `Resource temporarily unavailable` when trying to run a process means that some required resource is at capacity. There may be too many processes active, not enough available ports, or some sort of blocking cache is full, etc. Feel free to independently research and see if you come to the same conclusion.
Then, it seems safe to catch and handle this within the tool's `ErrorHandlingProcessManager` abstraction, as Flutter cannot realistically do anything to prevent this issue.
`DartDevelopmentServiceLauncher` was created to share the DDS launch
logic from flutter_tools with other Dart tooling.
---------
Co-authored-by: Andrew Kolos <andrewrkolos@gmail.com>
Reverts: flutter/flutter#152358
Initiated by: zanderso
Reason for reverting: Speculative revert to determine whether this PR is related to https://github.com/flutter/flutter/issues/153026
Original PR Author: andrewkolos
Reviewed By: {christopherfujino}
This change reverts the following previous change:
Contributes to fixing https://github.com/flutter/flutter/issues/137184.
Cleaned up version of earlier PR, https://github.com/flutter/flutter/pull/152187.
This PR guards all the writes to `Process::stdin` by wrapping them with `ProcessUtils.writelnToStdinUnsafe`. This way, if any writes fail, we should at least get a stacktrace in our crash reporting.
Nullable types for values in map patterns require the key to be present.
Since the 'uri' key is not always present in DDS exception responses,
this was causing us to fall back to throwing a StateError.
Fixes https://github.com/flutter/flutter/issues/152684
This reverts commit 7cdc23b3e1bae2bc7bc2d1f34773eaa3629d4fcc.
The failure in the `native_assets_test` integration test on Windows was caused by the DevTools process not being shutdown by the `ColdRunner` when running the profile mode portion of the test. This resulted in the test being unable to clean up the project created by the test as DevTools was still holding onto a handle within the directory. This PR adds back the mistakenly removed DevTools shutdown logic in the `ColdRunner`.
Reverts: flutter/flutter#146593
Initiated by: zanderso
Reason for reverting: Consistently failing `Windows_android native_assets_android` as in https://ci.chromium.org/ui/p/flutter/builders/prod/Windows_android%20native_assets_android/2533/overview
Original PR Author: bkonyi
Reviewed By: {christopherfujino, kenzieschmoll}
This change reverts the following previous change:
This change is a major step towards moving away from shipping DDS via Pub.
The first component of this PR is the move away from importing package:dds to launch DDS. Instead, DDS is launched out of process using the `dart development-service` command shipped with the Dart SDK. This makes Flutter's handling of DDS consistent with the standalone Dart VM.
The second component of this PR is the initial work to prepare for the removal of instances of DevTools being served manually by the flutter_tool, instead relying on DDS to serve DevTools. This will be consistent with how the standalone Dart VM serves DevTools, tying the DevTools lifecycle to a live DDS instance. This will allow for the removal of much of the logic needed to properly manage the lifecycle of the DevTools server in a future PR. Also, by serving DevTools from DDS, users will no longer need to forward a secondary port in remote workflows as DevTools will be available on the DDS port.
There's two remaining circumstances that will prevent us from removing DevtoolsRunner completely:
- The daemon's `devtools.serve` endpoint
- `flutter drive`'s `--profile-memory` flag used for recording memory profiles
This PR also includes some refactoring around `DebuggingOptions` to reduce the number of debugging related arguments being passed as parameters adjacent to a `DebuggingOptions` instance.
This change is a major step towards moving away from shipping DDS via
Pub.
The first component of this PR is the move away from importing
package:dds to launch DDS. Instead, DDS is launched out of process using
the `dart development-service` command shipped with the Dart SDK. This
makes Flutter's handling of DDS consistent with the standalone Dart VM.
The second component of this PR is the initial work to prepare for the
removal of instances of DevTools being served manually by the
flutter_tool, instead relying on DDS to serve DevTools. This will be
consistent with how the standalone Dart VM serves DevTools, tying the
DevTools lifecycle to a live DDS instance. This will allow for the
removal of much of the logic needed to properly manage the lifecycle of
the DevTools server in a future PR. Also, by serving DevTools from DDS,
users will no longer need to forward a secondary port in remote
workflows as DevTools will be available on the DDS port. This code is currently
commented out and will be enabled in a future PR.
There's two remaining circumstances that will prevent us from removing
DevtoolsRunner completely:
- The daemon's `devtools.serve` endpoint
- `flutter drive`'s `--profile-memory` flag used for recording memory
profiles
This PR also includes some refactoring around `DebuggingOptions` to
reduce the number of debugging related arguments being passed as
parameters adjacent to a `DebuggingOptions` instance.
This pull request aims for improved readability, based on issue #146600.
```dart
// before
List<SupportedPlatform> getSupportedPlatforms({bool includeRoot = false}) {
final List<SupportedPlatform> platforms = includeRoot
? <SupportedPlatform>[SupportedPlatform.root]
: <SupportedPlatform>[];
if (android.existsSync()) {
platforms.add(SupportedPlatform.android);
}
if (ios.exists) {
platforms.add(SupportedPlatform.ios);
}
if (web.existsSync()) {
platforms.add(SupportedPlatform.web);
}
if (macos.existsSync()) {
platforms.add(SupportedPlatform.macos);
}
if (linux.existsSync()) {
platforms.add(SupportedPlatform.linux);
}
if (windows.existsSync()) {
platforms.add(SupportedPlatform.windows);
}
if (fuchsia.existsSync()) {
platforms.add(SupportedPlatform.fuchsia);
}
return platforms;
}
// after
List<SupportedPlatform> getSupportedPlatforms({bool includeRoot = false}) {
return <SupportedPlatform>[
if (includeRoot) SupportedPlatform.root,
if (android.existsSync()) SupportedPlatform.android,
if (ios.exists) SupportedPlatform.ios,
if (web.existsSync()) SupportedPlatform.web,
if (macos.existsSync()) SupportedPlatform.macos,
if (linux.existsSync()) SupportedPlatform.linux,
if (windows.existsSync()) SupportedPlatform.windows,
if (fuchsia.existsSync()) SupportedPlatform.fuchsia,
];
}
```
When performing artifact lookups for `Artifact.genSnapshot` for macOS desktop builds, a `TargetPlatform` is used to determine the name of the tool, typically `gen_snapshot_$TARGET_ARCH`. Formerly, this tool was always named `gen_snapshot`.
The astute reader may ask "but Chris, didn't we support TWO target architectures on iOS and therefore need TWO `gen_snapshot` binaries?" Yes, we did support both armv7 and arm64 target architectures on iOS. But no, we didn't initially have two `gen_snapshot` binaries. We did *build* two `gen_snapshots`:
* A 32-bit x86 binary that emitted armv7 AOT code
* A 64-bit x64 binary that emitted arm64 AOT code
At the time, the bitness of the `gen_snapshot` tool needed to match the bitness of the target architecture, and to avoid having to do a lot of work plumbing through suffixed `gen_snapshot` names, the author of that work (who, as evidenced by this patch, is still paying for his code crimes) elected to "cleverly" lipo the two together into a single multi-architecture macOS binary still named `gen_snapshot`. See: https://github.com/flutter/engine/pull/4948
This was later remediated over the course of several patches, including:
* https://github.com/flutter/engine/pull/10430
* https://github.com/flutter/engine/pull/22818
* https://github.com/flutter/flutter/pull/37445
However, there were still cases (notably `--local-engine` workflows in the tool) where we weren't computing the target platform and thus referenced the generic `gen_snapshot` tool.
See: https://github.com/flutter/flutter/issues/38933
Fixed in: https://github.com/flutter/engine/pull/28345
The test removed in this PR, which ensured that null `SnapshotType.platform` was supported was introduced in https://github.com/flutter/flutter/pull/11924 as a followup to https://github.com/flutter/flutter/pull/11820 when the snapshotting logic was originally extracted to the `GenSnapshot` class, and most invocations still passed a null target platform.
Since there are no longer any cases where `TargetPlatform` isn't passed when looking up `Artifact.genSnapshot`, we can safely make the platform non-nullable and remove the test.
This is pre-factoring towards the removal of the generic `gen_snapshot` artifact from the macOS host binaries (which are currently unused since we never pass a null `TargetPlatform`), which is pre-factoring towards the goal of building `gen_snapshot` binaries with an arm64 host architecture, and eliminate the need to use Rosetta during iOS and macOS Flutter builds.
Part of: https://github.com/flutter/flutter/issues/101138
Umbrella issue: https://github.com/flutter/flutter/issues/103386
Umbrella issue: https://github.com/flutter/flutter/issues/69157
No new tests since the behaviour is enforced by the compiler.
